Piccolo Hybrid+ UK

Piccolo Hybrid IoT

A dual mode GPS Trailer Tracker Device Designed Specifically For Trailer Tracking. 

*Available on CATM1/NB1 Networks Worldwide 

with fallback to 2g

The dual mode, 5 year battery life, plug and play GPS trailer tracker device is packaged in an ultra-rugged IP67 waterproof enclosure with integrated GPS and cellular antennas, available on 4G CATM1/NB1 networks worldwide with fallback to 2G. With over the air configuration, SMS alarms on unauthorized vibrations and auto alerts when external power is disconnected/connected to trailer, this is the very best trailer GPS tracker and is excellent for all types of trailers and refrigerated trailers. 

The Piccolo Hybrid Dual Mode will switch automatically from real-time tracking mode to asset tracking mode when external power is disconnected, providing comprehensive visibility for trailers parked at job sites waiting to be unloaded and reloaded.

Comprehensive Trailer Visibility

Know when trailer is disconnected from the cabin and the ability to pair truck to trailer (which trailer is attached to which truck).

Zero Maintenance

Device recharges when the trailer is hooked up to a truck, removing maintenance and battery charging burdens.

Temperature Monitoring

For temperature controlled trailers, the Hybrid lets you monitor up to 6 different wired cold zones simultaneously or 50 wireless cold zones  for maximum temperature monitoring and control.

How it works

When externally powered (tethered to the power of the trailer), the Piccolo Hybrid IoT operates in real-time vehicle tracking mode sending GPS in high frequency, for example every minute.

Once power is disconnected, the Piccolo Hybrid IoT automatically switches to Asset Tracking (AT) mode, sending an alert on trailer disconnect and providing complete visibility on the whereabouts of your trailer, sending a GPS check in 1/ day when parked (user-definable).

In AT Mode, once movement/vibration is detected, the Piccolo Hybrid IoT will automatically wake up, send an alert and will report more frequently for as long as the vibration continues. For example, every 30 minutes (user configurable).

The Piccolo Hybrid IoT can be supplied with a DC plug in place of the wire harness. With this configuration, the Piccolo Hybrid IoT serves as a standalone, autonomous container or asset tracker with a 5-year battery life or up to 5000 GPS on a single charge when powered by the internal 7800 mAH rechargeable lithium battery.

Upgraded to Lead Telematics into IoT

In addition to it’s trailer tracking functionality , various IoT BLE tags have been integrated with the Piccolo Hybrid IoT, enabling the device to act as an IoT Gateway, which is used to process and forward the IoT data to the server- for an all around connected fleet.

Piccolo hybrid IoT diagram

IoT Applications

Use the Piccolo Hybrid IoT telematics platform for trailer and asset tracking 

Product Features

When powered by the large 7800Mamp battery can report up to 5,000 GPS positions off a single charge. Once external power is restored, the internal battery will recharge.

2 digital inputs, 1 digital output and 1 analog input allow for various types of sensors such as pressure, temperature, engine on/off, vibration alarm, door open/close and more.

Supports up to 6 wired digital temperature sensors, allowing you to monitor up to 6 different cold zones simultaneously.

Auto alarm with GPS location when the unit moves in and out of a predetermined zone

Various IoT BLE tags have been integrated with the Piccolo Hybrid IoT. This functionality enables device to act as an IoT Gateway which is used to process and forward the IoT data to the server- for an all around connected fleet.

Auto alert when and where the external power is connected / disconnected.

Easily reconfigure the Piccolo Hybrid+ OTA or by sending SMS commands.

When an event is detected, the Piccolo Hybrid is programmable to send an SMS alarm to mobile phones together with the current GPS coordinates.

Highly compressed OTA, UDP communication packaged with MidLink Middleware and “Plug & Play” API or DLL for quick integration into any third party software

Technical Specifications

  • Network
    4G CATM1/NB1 with 2G Fallback. Supported
    bands Cat.M1 & NB1, LTE-FDD:B1/B2/B3/B4/B5/
    B8/B12/ B13/B18/B19/B20/B26/B28 LTE-TDD: B39
    (for Cat.M1 only) GSM850/GSM900/
  • Communication
    Highly compressed OTA, UDP communication
    packaged with MidLink Middleware or Direct TCP/
    IP communication
  • Wireless Sensors
    Compatible with WLI Family of RF Beacons
  • Storage
    Store & Forward- Built-in flash storage for data
    logging when out of cellular connectivity
  • Radio Frequency
    2.4GHz proprietary protocol, BLE (supports
    iBeacons, TLM and custom protocols).
  • Range
    Up to 220 ft / 70m. Actual range may vary
    depending on RF interference, building
    materials, and physical obstacles
  • Data Transmit
    Automatically connects to any associated Piccolo
    and transmits every 20 seconds
  • Material
    Flame retardant ABS/PC Flame rating UL94V-0.
  • Dimensions
    4.9” x 3.3” x 1.6” LWD (125mm x 87mm x 41mm)
    • Weight: 3. 7 oz.(105gr) without batteries
  • Operating Temperature
    -22° to 176° F (-30° to 80° C)
  • Storage Temperature
    -40° to 221° F (-40° to 105° C).
  • IP67 waterproof enclosure
  • Power Source
    6DC-32VDC tethered to vehicle battery and battery
    powered by either 4000mAh or 7800mAh
    rechargeable lithium battery.
  • Transmit
    1.8A pulse at 3VD
  • Sleep Mode
    10uA at 3V.
  • Battery
    Up to 5,000 GPS positions when powered by the
    7800mAh battery pack
  • Charging Integrated fast charger module. Batteries arecharged via external off the shelf standard 12v wall charger. Charge time around 4-8 hours depending on battery capacity.
  • Integrated 0.5W Solar Panel
  • CANBus Interface
    Supports OBDII, J1939 and J1708
  • IO’s
    2 Digital Inputs, 1 Digital Outputs and 1 Analog
    Input
  • Digital Outputs
    Two open collectors 500mA
  • 3D Accelerometer
    For tilt detection and extreme driving reporting
  • Starter Killer
    Command can be sent OTA to kill vehicle starter in case of theft.
  • Driver ID
    Authorized list of Driver ID’s may be downloaded to the unit OTA so only specific drivers can start the vehicle.
  • Connect to power of trailer
  • Mount to trailer with magnets, 3M tape or screws

Get A Quote

Fill out the form below and a member of our sales team will get back to you