The solar powered Piccolo ATX2S wireless GPS tracker is packaged in an ultra rugged IP67 waterproof enclosure with a rechargeable battery capacity of sending up to 10,000 GPS positions on a single charge. The large solar panel charges the integrated rechargeable lithium battery with power equivalent to the transmission of up to 20 GPS positions a day,
The Piccolo ATX2S IoT acts as an IoT Gateway communicating with our family of IoT Tags and uploading the IoT data to the server—for all-around connected operations.
Use the Piccolo ATX2S IoT Telematics Platform for countless applications.
Integrated solar panel recharges the unit at an equivalent rate of up to 20 GPS positions/day, removing maintenance needs.
Houses up to two large 7800Mamp rechargeable lithium batteries. Each battery can transmit up to 5,000 GPS positions when fully charged. When packaged with two 7800Mamp batteries, the ATX2S can transmit a total of up to 10,000 GPS positions.
ruggedized, purpose built to withstand harsh environments.
The Piccolo ATX2S IoT acts as an IoT Gateway communicating with our family of IoT Tags and uploading the IoT data to the server - for an all around connected operations.
Use the Piccolo ATX2S IoT Telematics Platform for countless applications
The revolutionary Solar Powered Piccolo ATX2S has a rechargeable battery capacity of sending up to 10,000 GPS positions on a single charge. The large solar panel charges the integrated rechargeable lithium battery with power equivalent to the transmission of up to 20 GPS positions a day. (depending on weather, location and exposure to the sun)
Can be preprogramed to send the GPS location every XX hours (usually once a day) when the asset is in stop position. When vibration is detected the unit wakes up automatically and sends an alarm and switches to motion mode sending GPS every XX minutes for as long as the asset is in motion mode (usually every 60 minute).
Once movement/vibration is detected, the unit wakes up automatically, sends an alarm and switches to motion mode sending GPS every XX minutes for as long as the asset is in motion mode (usually every 60 minutes).
When the Piccolo ATX2S is wired to an external power source such as trailer connected to the cabin, the ATX2S internal batteries will be charged and the ATX2S will operate in real-time sending GPS say every minute. When the cabin disconnects from the trailer the external power is disconnected and the ATX2S will automatically switch to be powered by the internal battery and will switch to asset tracking mode (described above).
The large solar panel charges the integrated rechargeable lithium battery with power equivalent to the transmission of up to 20 GPS positions a day.
Houses two large 7800Mamp rechargeable lithium batteries. Each battery can transmit up to 5,000 GPS positions when fully charged. When packaged with two 7800Mamp batteries, the ATX2S can transmit a total of up to 10,000 GPS positions.
Support for various sensors including temperature, pressure, load, light and more.
The Piccolo ATX2S can change the frequency of transmitting GPS when entering a pre-configured geo-fence.
Reconfigure the Piccolo ATX2S Over the Air (OTA) or by sending SMS commands.
Designed for harsh environments, the ATX2S is housed in a robust IP67 waterproof enclosure.
ATX2S can be mounted in place with: heavy duty magnets, mounting bracket or with 3M Heavy Duty Tape.
When an event is detected, the Piccolo ATX2S is programmable to send an SMS alarm to mobile phones together with the current GPS coordinates.
When equipped with the optional wire-harness, the ATX2S supports 2 Digital inputs, 1 Digital Output and 1 Analog Input, for event logs such as door open/close, alarm link and various types of sensors
The unit can change the frequency of transmitting GPS when entering a pre-configured geofence to be detected at first ATX-2S wake up.
Sends to the server the battery level it currently operates on and current temperature inside the unit.
For automatic security theft alarm and motion detection
The unit detects when the vehicle is moving. Extremely low power consumption achieved by innovative battery management to preserve battery life.
The unit can store up to 5,000 events when out of cellular coverage then sends them automatically when back in cellular coverage
| Technical Specifications | Network availability – GSM/GPRS or EDGE/HSPA+ (3G) or 4G CATM NB1 |
| Frequency Bands – 2G Quad-Band, 3G European: 900/1800/2100 or 3G US 850/1900 MHZ, 4G NB1: Cat.M1 & NB1, LTE-FDD:B1/B2/B3/B4/B5/B8/B12/ B13/B18/B19/B20/B26/B28 LTE-TDD: | |
| GPS – MTK 66 Channels | |
| Dimensions: 7.3” x 2.8” x 1.6” | (185mm x 73mm x 41mm) without solar panel and | bracket | |
| Enclosure: PLUSTEK PB5001J8BK11 Black, 40% Glass | Fiber & Glass Beads Reinforced, Halogen and Red Phosphorus | Free, Flame Retardant, UV Stabilized POLYAMIDE 6 | |
| Weight: 9oz (255gr) without the batteries |
| Environmental Specifications | Operating Temperature: -22º to 176º F (-30º to 80º C) |
| Storage Temperature: -40º to 221º F (-40º to 105º C) | |
| Humidity: 0 to 99% 110F (40C), non-condensing | |
| Shock/Vibration/Mechanical: meets or exceeds EIA standard RS-316B 3G (operating), 20G | (non operating) XYZ 3 directions. Meets SAE J1455 |
| Power source options | Operated by Rechargeable battery – the standard is one | 4.2 VDC Lithium rechargeable battery pack with a capacity of 7800mA. When fully charged has the capacity of transmittng around 5000 GPS positions. |
| Optionally a second battery pack can be added with same capacity for transmitting a total of around 10000 GPS positions. The unit has an internal fast charger. The batteries are charged via an external of the shelf standard 6-24VDC | regulated power supply wall powered (110-220 AC) that | plugs into the unit via a waterproof connector. Optionally | the unit can be charged from a car battery via the | cigarette plug. The charge time is around 4-5 for one battery | pack. | |
| Solar Powered the unit configuration remains as | described above with a rechargeable battery or two battery packs, the solar panel will charge the lithium | batteries at 200Mamp in full sun. In a sunny day the solar panel will charge the batteries with power the equivalent | to around 20 GPS transmissions. |
| Electrical Specifications & Installation | Standby mode: 40mA at 3V |
| Sleep mode: 45µA at 3V | |
| Transmit mode: 1.8A pulse at 3V | |
| For portability – Install mounting bracket on any trailer, container and/or asset | |
| Magnets – For easy installation on metal surfaces | |
| Two sided 3M Industrial tape- for a strong, permanent attachment | |
| Mount the Piccolo ATX 2S to the asset with screws |